Blower Motor Resistor: Removal
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
Remove the right side instrument panel insulator. Disconnect the electrical connector from the blower motor resistor. See Figure. Disconnect the electrical connector from the blower motor. The blower motor resistor opening is slotted. Access is extremely limited. Loosen both screws from the front of blower motor resistor. See Figure. Remove the screws from the rear of blower motor resistor. Remove the blower motor resistor.