LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Drive Axles) >> Removal & Installation >> Differential Carrier Cover And Seal >> Installation (Right)

Installation (Right)

WARNING: This page is about a different car, the 2003 Chevrolet Corvette and 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the "O" ring sealing surface on the differential cover (right) and the differential housing. Install a new "O" ring seal to the differential cover (right). Install the differential cover (right) to the differential. Install the transmission vent tube retainer onto the vent tube, then position the retainer to receive the retaining bolt (automatic transmission).
  2. Install the axle cover (right) retaining bolts. Tighten the axle cover (right) retaining bolts to specification. See TORQUE SPECIFICATIONS . Fill the rear axle differential with the proper fluids and to the proper level. See LUBRICANT CHANGE  under LUBRICANT. Install the right muffler assembly. Install the right axle shaft. See AXLE SHAFTS . Install the right rear tire and wheel assembly. Lower the vehicle.