LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat belt from the side of the seat belt guide.
  2. Remove the nuts that retain the seat to the floor. See Fig 1.
  3. Disconnect the electrical connector from the power seat if equipped.
  4. Remove the seat and the riser from the vehicle.
  5. Remove the seat belt guide from the seat riser.
  6. Fig 1: Removing/Installing Nuts Retaining Seat To Floor
    G00377194Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolts that retain the seat to the riser. See Fig 2.
  8. Remove the power seat from the seat risers if equipped. Refer to Seat Adjuster Mechanism Replacement - Power .
  9. Remove the manual seat adjuster wire from the seat tracks.
  10. Remove the seat riser spacer nuts and bolts from the seat tracks.
  11. Remove the seat riser spacer from the seat risers.
  12. Fig 2: Removing/Installing Bolts Retaining Seat To Riser
    G00377195Courtesy of GENERAL MOTORS CORP.