LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bench seat and risers from the vehicle. Refer to Seat Replacement - Rear Bench (2001)  or Seat Replacement - Rear Bench (2002)  .
  2. Remove the right and left sides of the seat back hinge trim. Refer to Seat Back Hinge Trim Replacement - Rear Left  and Seat Back Hinge Trim Replacement - Rear Right (YC6)  .
    NOTE: Note the position and length of the bolts you remove. This will assist with reassembly.
  3. Remove the bolts retaining the seat back hinges to the seat cushion frame. See Figure.
  4. Remove the J-hooks that retain the seat cushion cover to the seat cushion frame. See Fig 1.
    Fig 1: Removing/Installing J-Hooks Retaining Seat Cushion
    G00377231Courtesy of GENERAL MOTORS CORP.
    NOTE: Note the locations of the hog rings for reassembly.
  5. Remove the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame. See Fig 2.
    6. Fig 2: Removing/Installing Hog Rings
    G00377232Courtesy of GENERAL MOTORS CORP.
  6. Remove the seat back cushion cover and pad from the seat cushion frame. See Fig 3.
    Fig 3: Removing/Installing Seat Back Cushion Cover & Pad
    G00377233Courtesy of GENERAL MOTORS CORP.
    NOTE: Note the locations of the hog rings for reassembly.
  7. Remove the hog rings that retain the seat cushion cover to the seat cushion pad located under the seat cushion cover. See Figure.
  8. Remove the seat cushion cover from the seat cushion pad.
scientia non olet · About LEMON Manuals