Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bucket seat from the riser. Refer to Seat Replacement - Bucket .
- Remove the armrest from the recliner side of the seat. Refer to Armrest Replacement (YC7) or Armrest Replacement (YC6) .
- Remove the J-hooks that retain the carpet on the back of the seat cushion to the corners of the seat cushion trim cover.
- Remove the screw that retains the seat back recliner handle to the recliner.NOTE: When removing the bolts that retain the seat back recliner, note the position and length of the bolts. This will assist with reassembly.
- Remove the bolts that retain the recliner to the seat back and seat cushion frames. See Figure.
- Remove the bolts that retain the recliner to the seat back and seat cushion frames.CAUTION: Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage the seat back hinge or the lumbar support cable.
- Remove the seat back recliner from the seat frame.