LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front (YC5, YC6) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bucket seat from the riser. Refer to Seat Replacement - Bucket .
  2. Remove the screw that retain the recliner handle to the recliner.
  3. Remove the following seat cover J-hooks from the seat cushion frame:
    • The J-hook at the rear of the seat.
    • The J-hook on the recliner side of the seat.
    • The J-hook on the recliner side of the seat that retains the seat back cover and to the carpet to the seat back.
    NOTE: When removing the recliner retaining bolts, note the position and length of the bolts. This will assist with reassembly.
  4. Remove the bolts that retain the recliner to the seat cushion frame. See Fig 1.
    5. Fig 1: Removing/Installing Bolts Retaining Recliner To Seat Cushion Frame
    G00377203Courtesy of GENERAL MOTORS CORP.
  5. Remove the armrests, if equipped. Refer to Armrest Replacement (YC7)  or Armrest Replacement (YC6)  .
  6. Lift the seat back cover and pad above the bolts that retain the recliner to the seat back frame.
    NOTE: When removing the bolts, note the position and length of the bolts. This will assist with reassembly.
  7. Remove the bolts that retain the recliner.
    CAUTION: Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage the seat back hinge or the lumbar support cable.
  8. Remove the recliner from the seat back frame.
scientia non olet · About LEMON Manuals