LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Latch Release Cable Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back latch release cable to the seat back frame.
  2. Install the seat back latch release cable to the clips that retain the cable to the seat back frame. See Figure.
  3. Install the seat back cable end to the seat back latch. See Figure.
  4. Install the seat back cushion cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear (YC5 and YC6)  or Seat Back Cover and Pad Replacement - Rear (YC7)  .
  5. Zip the seat back cover. See Figure.
  6. Install the bench seat to the vehicle. Refer to Seat Replacement - Rear Bench (2001)  or Seat Replacement - Rear Bench (2002)  .
scientia non olet · About LEMON Manuals