LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Front (YC7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bucket seat from the seat riser. Refer to Seat Replacement - Bucket .
  2. Remove the armrest from the same side of the seat as the hinge. Refer to Armrest Replacement (YC7)  or Armrest Replacement (YC6)  .
  3. Remove the J-hooks that retains the carpet on the seat back cushion and to the corners of the seat cushion cover.
  4. Remove the seat cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7)  .
    NOTE: Note the position and length of all the bolts removed. This will assist with reassembly.
  5. Remove the bolts that retain the seat back hinges to the seat cushion and the seat back frame. See Figure.
    CAUTION: Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage the seat back hinge or the lumbar support cable.
  6. Remove the seat back hinges from the seat frame.
scientia non olet · About LEMON Manuals