LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Front (YC7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back hinges to the seat frame.
    CAUTION: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  2. Install the bolts that retain the seat back hinges to the seat back frame and to the seat cushion frame. See Figure.

    Tighten 

    Tighten the bolts that retain the seat back hinges to the seat back frame and the seat cushion frame to 30 N.m (22 ft lbs).

  3. Install the bolts in the locations noted during disassembly.
  4. Install seat cover and pad. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7)  .
  5. Install the J-hooks that retain the carpet to the seat back and to seat cushion frame and to the corners of the seat cushion cover.
  6. Install the armrest. Refer to Armrest Replacement (YC7)  or Armrest Replacement (YC6)  .
  7. Install the bucket seat to the riser. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals