LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Front (YC5 and YC6) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bucket seat from the seat riser. Refer to Seat Replacement - Bucket .
  2. Remove the seat cover J-hook from the seat cushion frame:
    1. Remove the J-hook at the rear of the seat.
    2. Remove the J-hook on the side of the seat containing the seat back hinge.
    3. Remove the J-hook that retains the cover to the carpet on the back of the seat on the side of the seat containing the seat back hinge.
    NOTE: Note the position and length of all the bolts removed. This will assist with reassembly.
  3. Remove the bolts that retain the seat back hinge to the seat cushion frame.
  4. Remove the armrests, if equipped. Refer to Armrest Replacement (YC7)  or Armrest Replacement (YC6)  .
  5. Lift the seat back cover and pad above the bolts that retain the seat back hinge to the seat back frame.
    NOTE: Note the position and length of all the bolts removed. This will assist with reassembly.
  6. Remove the bolts that retain the seat back hinge to the seat back frame. See Figure.
    CAUTION: Handle the seat carefully when just one side of the seat back is attached to the seat cushion. Improper handling may damage the seat back hinge or the lumbar support cable.
  7. Remove the seat back hinge from the seat back frame.
scientia non olet · About LEMON Manuals