LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Seat System) >> Repair Instructions >> Seat Back Cover and Pad Replacement - Rear (YC5 and YC6) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bench seat from the vehicle. Refer to Seat Replacement - Rear Bench (2001)  or Seat Replacement - Rear Bench (2002)  .
  2. Remove the headrests. Refer to Head Restraint Replacement (YC6)  or Head Restraint Replacement (YC7)  .
  3. Remove the rear seat armrests, if equipped. Refer to Armrest Replacement - Rear Seat (YC5 and YC6)  or Armrest Replacement - Rear Seat (YC7)  .
  4. Remove the right and left seat back hinge. Refer to Seat Back Hinge Trim Replacement - Rear Left  and Seat Back Hinge Trim Replacement - Rear Right (YC6)  .
  5. Remove the headrest bushings. See Figure.
  6. Unzip the seat back cover. See Figure.
  7. Remove the seat back cover and pad from the seat back frame.
    NOTE: Note the locations of the hog rings. This will assist with reassembly.
  8. Remove the hog rings that retain the seat back cover to the pad.
  9. Remove the seat back cover from the pad.
scientia non olet · About LEMON Manuals