Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bucket seat from the vehicle. Refer to Seat Replacement - Bucket .
- Place the seat on a clean, prepared surface.
- Remove the 8 nuts that retain the riser to the adjuster.
- Remove the riser from the adjuster.
- Remove the 4 bolts that retain the adjuster to the seat. See Figure.
- Position the seat trim panel(s) in order to disconnect the power seat switch connector.
- Partially separate the adjuster from the seat in order to remove the seat trim panels from the assembly.
- Remove the adjuster from the seat.