LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Automatic Transmission Servicing - ALLISON LCT 1000) >> Removal & Installation >> Filler Tube & Seal >> Installation

Filler Tube & Seal: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, 2004 Chevrolet Cab & Chassis Silverado, and 2003 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new fill tube plug seal (2) into the main housing. See Figure .
  2. Align the tab on the fill tube plug (1) with the tang on the main housing.
  3. Install the fill tube plug (1). Press the plug into the seal (2) until the tab on the fill tube plug locks into place in the notch on the main housing. See Figure .
  4. Install the NEW fill tube seal to the transmission.
  5. Install the fill tube to the transmission. Ensure the fill tube bracket is positioned properly on the studs. See Figure .
  6. Install the fill tube bracket nuts to the studs. See Figure . Tighten the fill tube bracket nuts to specification. See TORQUE SPECIFICATIONS  .
  7. Lower the vehicle.
  8. Fill the transmission with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals