LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Automatic Transmission - 4L60-E/4L65-E - Servicing) >> Removal & Installation >> Shift Cable Bracket >> Removal

Shift Cable Bracket: Removal

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 GMC Sierra, 2004 Chevrolet Tahoe, and 2004 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the Parking brake.
  2. Place the transmission into Neutral.
  3. Raise and support the vehicle.
  4. Remove the retainer that secures the cable to the bracket. See Fig 1 .
  5. Depress the tangs and remove the cable from the bracket.
  6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission. See Fig 2 .
  7. Remove the transmission range selector cable bracket.
Fig 1: Removing Shift Cable Retainer
G00202984Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Shift Cable Bracket
G00096160Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals