LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Automatic Transmission - 4L60-E/4L65-E - Servicing) >> Removal & Installation >> 2-4 Servo >> Installation

2-4 Servo: Installation

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 GMC Sierra, 2004 Chevrolet Tahoe, and 2004 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install NEW seals onto the servo pistons and the servo cover.
  2. Install the 2-4 servo. See Figure .
  3. Install the servo cover depressor.
  4. Tighten the bolt on servo cover depressor in order to compress the servo cover. See Figure .
  5. Install the servo cover ring.
  6. Remove the servo cover depressor.
  7. Install the oil pan bolt. Tighten the bolt to specification. See TORQUE SPECIFICATIONS  .
  8. Install the heat shield and bolts. See Figure . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  .
  9. Install the exhaust pipe.
  10. Fill transmission to proper level with appropriate fluid. See LUBRICATION  .
scientia non olet · About LEMON Manuals