Hub & Drum Assembly: Removal
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Savana Special, and 2002 GMC Savana Camper Special. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove wheel assembly. Remove axle shaft. See AXLE SHAFTS . Remove outer retaining ring and locking key. See Figure . Using Wheel Bearing Nut Wrench Set (J-2222-C), remove adjusting nut. Slide hub and drum assembly off axle shaft tube.