LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Disc Brakes) >> Removal & Installation >> Vacuum Brake Booster >> Installation

Vacuum Brake Booster: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the gasket to the booster. See Figure.
  2. Install the vacuum booster.
  3. Install the 4 vacuum booster mounting nuts. Tighten the nuts to specification. See TORQUE SPECIFICATIONS .
  4. Install the pushrod and the stoplight switch to the brake pedal stud. See Figure.
  5. Install the pushrod retaining clip to the brake pedal stud.
  6. Install the vacuum hose to the brake booster check valve. See Figure.
  7. Install the master cylinder. MASTER CYLINDER .
  8. Release the park brake and unblock the wheels.
scientia non olet · About LEMON Manuals