LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Disc Brakes) >> Removal & Installation >> Park Brake Cable >> Installation (Left Rear - With 4-Wheel Steering)

Installation (Left Rear - With 4-Wheel Steering)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the NEW brake cable into the rear brake cable mounting bracket by pushing the cable into place until the locking tabs snap into place. See Figure.
  2. Install the park brake cable to the lever. See Figure.
  3. Install the rear park brake cable bracket bolt. See Figure. Tighten the rear park brake cable bracket bolt to specification. See TORQUE SPECIFICATIONS .
  4. Install the park brake cable and the bolt to the lower shock absorber mount. See Figure. Tighten the park brake cable bolt to specification. See TORQUE SPECIFICATIONS .
  5. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts. See Figure.
  6. Install the park brake cable to the equalizer bar. See Figure.
  7. Remove the safety stands.
  8. Lower the vehicle.