Park Brake Cable Mounting Bracket: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Release the parking brake.
- Raise and support the vehicle.
- Release the tension on the cables by loosening the nut at the equalizer. See Figure.
- Disconnect the rear cables from the equalizer.
- Remove the rear cables from the mounting bracket by depressing the retaining tabs and pulling rearward.
- Remove the cable support bracket nuts. See Fig 1.
- Remove the cable support bracket.