EVAP Canister Vent Solenoid: Installation
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the EVAP canister vent valve harness connector.
- Install the clip into the EVAP canister vent valve harness connector. See Figure .
- Install the EVAP canister vent valve by pushing the mounts into the original holes.
- Lubricate the hose end with lubricant.
- Install the hose to the EVAP canister vent valve. See Figure .
- Disconnect the EVAP canister vent valve harness connector.
- Lower the vehicle.