Removal (3.4L)
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to OFF position.
- Disconnect the Evaporative Emission (EVAP) canister purge valve harness connector.
- Disconnect the EVAP canister purge valve pipe and the vacuum supply hose. See Fig 1 .
- Remove the EVAP canister purge valve retaining bolt. See Fig 2 .
- Remove the EVAP canister purge valve.