LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Engine Controls - Removal & Installation) >> Motors & Solenoids >> EVAP Canister Purge Solenoid >> Removal (2.2L)

Removal (2.2L)

WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the EVAP canister purge solenoid harness connector. See Fig 1 .
  2. Disconnect the vacuum pipe from the EVAP canister purge solenoid.
  3. Disconnect the purge pipe from the EVAP canister purge solenoid.
  4. Remove the EVAP canister purge solenoid and bracket.
  5. Remove the EVAP canister purge solenoid from the purge bracket.
  6. Inspect for carbon release in the EVAP canister purge solenoid ports.
Fig 1: Removing/Installing EVAP Canister Purge Valve (2.2L)
G00217352Courtesy of GENERAL MOTORS CORP.