LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (HVAC Systems - Manual) >> Removal & Installation >> Coolant Bypass Valve >> Removal

Coolant Bypass Valve: Removal

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner. See Figure. Remove the upper fan shroud. See Figure. Drain the engine coolant.
  2. Disconnect the electrical connector from the (auxiliary if equipped) coolant bypass valve. Remove the vacuum hose from the (auxiliary) coolant bypass valve. Remove the bolt that retains the (auxiliary) coolant bypass valve to the heater assembly. See Figure or Figure .
  3. Using the hose clamp pliers, reposition the (auxiliary) heater inlet hose clamp from the (auxiliary) coolant bypass valve. Remove the (auxiliary) heater inlet hose from the (auxiliary) coolant bypass valve. Using the hose clamp pliers, reposition the (auxiliary) outlet heater hose clamp from the (auxiliary) coolant bypass valve.
  4. Remove the (auxiliary) outlet heater hose from the (auxiliary) coolant bypass valve. Remove the (auxiliary) coolant bypass valve.
scientia non olet · About LEMON Manuals