LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> Transaxle Internal Wiring Harness >> Removal

Transaxle Internal Wiring Harness: Removal

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the case side cover. See REMOVAL & INSTALLATION in SERVICING - CENTURY & REGAL article.
  2. Use a small flat-bladed tool to remove the wiring harness from the solenoid valve(s), TFP manual valve position switch and/or the temperature sensor.
  3. Remove the wiring harness. See Fig 1 .
Fig 1: Removing Wiring Harness
G00186739Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals