Conditions For Running DTC P0756
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
DTC will run under the following conditions:
- No TP sensor DTC P0121, P0122 or P0123.
- No VSS DTC P0502 or P0503.
- No ISS sensor DTC P0716 or P0717.
- No 1-2 shift solenoid valve electrical DTC P0753.
- No 2-3 shift solenoid valve electrical DTC P0758.
- No TCC PWM solenoid valve DTC P1860.
- The transmission fluid temperature is between 68°F (20°C) and 266°F (130°C).
- The vehicle speed is greater than 5 MPH.
- The throttle angle is greater than 10 percent.
- The engine torque is 60-200 ft. lbs. (81-270 N.m).
- The input shaft speed is 150-8000 RPM.
- The output shaft speed is greater than 300 RPM.
- The time since the last range change is greater than one second.