Exhaust Manifold Installation - Left Side
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position a NEW exhaust manifold gasket onto the left exhaust manifold.
- Install the exhaust manifold bolts into the left exhaust manifold.
- Place the left exhaust manifold, exhaust manifold gasket and bolts as an assembly in position on the left cylinder head.
- Install the exhaust manifold bolts into the left cylinder head and tighten to 25 N.m (18 lb ft).
- Install the engine coolant temperature (ECT) sensor and tighten to 30 N.m (22 lb ft).
- Place the left exhaust manifold heat shield in position.
- Install the left exhaust manifold heat shield bolts and tighten to 10 N.m (89 lb in).
- Install the left torque strut bracket.
- Install the left torque strut bracket bolts and tighten to 50 N.m (37 lb ft).
CAUTION:
Refer to Fastener Caution
.