Engine Coolant Thermostat Housing Installation (LY7)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install a NEW gasket onto the thermostat housing.
- Install the thermostat housing.
- Install the thermostat housing bolts and tighten to 10 N.m (89 lb in).
- Install a NEW gasket and O-ring onto the heater inlet/outlet pipe assembly.
- Install the heater inlet/outlet pipe assembly.
- Install the heater inlet/outlet pipe assembly bolts and tighten to 10 N.m (89 lb in).
CAUTION:
Refer to Fastener Caution
.