LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine Mechanical - 3.6L (5 Of 6)) >> Repair Instructions - Off Vehicle (3 Of 4) >> Water Pump Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspecting Water Pump & Hub
    GM1211126Courtesy of GENERAL MOTORS CORP.
  1. Rotate the water pump hub (1). The water pump hub and impeller should turn straight and smoothly. If the hub wobbles, is noisy, or feels rough when rotated, replace the water pump.
  2. Inspect the exterior of the water pump for the following:
    • Damage to the water pump hub bolt threads (2) for the water pump pulley
    • Damage to the water pump bolt holes (3)
  3. Fig 2: Checking Water Pump Shaft & Weep Hole For Leakage
    GM1318423Courtesy of GENERAL MOTORS CORP.
  4. Examine the water pump shaft (1) and the weep hole reservoir (2) in the water pump body for signs of leakage. If coolant leakage is evident, replace the water pump.
  5. Fig 3: Inspecting Interior Of Water Pump For Damage
    GM1211128Courtesy of GENERAL MOTORS CORP.
  6. Inspect the interior of the water pump for the following:
    • Damage to the water pump gasket sealing surface (1)
    • Damage, corrosion or restrictions to the water pump impeller (2)
    • Damage, corrosion or restrictions to the coolant passages (3)
  7. Repair or replace the water pump as necessary.