LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine Mechanical - 3.6L (5 Of 6)) >> Repair Instructions - Off Vehicle (3 Of 4) >> Intake Manifold Disassemble (LY7) >> Upper Intake Manifold Disassemble Procedure

Upper Intake Manifold Disassemble Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Rail Support Bracket
    GM1531030Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel rail support bracket bolt.
  2. Remove the fuel rail support bracket.
  3. Fig 2: Throttle Body
    GM1866901Courtesy of GENERAL MOTORS CORP.
  4. Remove the throttle body bolts.
  5. Remove the throttle body.
  6. Remove and discard the throttle body gasket.
  7. Fig 3: BARO Sensor
    GM1866902Courtesy of GENERAL MOTORS CORP.
  8. Remove the barometric pressure (BARO) sensor bolt.
  9. Remove the BARO sensor.
  10. Fig 4: Intake Manifold Opening Cover
    GM1866903Courtesy of GENERAL MOTORS CORP.
  11. Remove the intake manifold opening cover bolts.
  12. Remove the intake manifold opening cover.