LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine Mechanical - 3.6L (5 Of 6)) >> Repair Instructions - Off Vehicle (3 Of 4) >> Intake Manifold Cleaning and Inspection (LCS) >> Upper Intake Manifold Assemble Procedure

Upper Intake Manifold Assemble Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Manifold Opening Cover
    GM1866903Courtesy of GENERAL MOTORS CORP.
  1. Install the intake manifold opening cover.
  2. Install the intake manifold opening cover bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: BARO Sensor
    GM1866902Courtesy of GENERAL MOTORS CORP.
  3. Install the barometric pressure (BARO) sensor.
  4. Install the BARO sensor bolt and tighten to 10 N.m (89 lb in).
    5. Fig 3: Throttle Body
    GM1866901Courtesy of GENERAL MOTORS CORP.
  5. Install the NEW throttle body gasket.
  6. Install the throttle body.
  7. Install the throttle body bolts and tighten to 10 N.m (89 lb in).
    8. Fig 4: Fuel Rail Support Bracket
    GM1531030Courtesy of GENERAL MOTORS CORP.
  8. Install the fuel rail support bracket.
  9. Install the fuel rail support bracket bolt and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals