Oil Pan Assemble
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install a NEW oil suction tube seal onto the oil suction tube. DO NOT reuse the old oil suction tube seal.
- Install the oil suction pipe.
- Install the oil suction pipe bolts and tighten to 10 N.m (89 lb in).
- Install the oil pan scraper.
- Install the oil pan scraper bolts and tighten to 10 N.m (89 lb in).
- Install the oil pan drain plug and NEW O-ring seal and tighten to 20 N.m (15 lb ft).
CAUTION:
Refer to Fastener Caution
.