LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1719 (Engine Mechanical - 3.6L (4 Of 6)) >> Repair Instructions - Off Vehicle (2 Of 4) >> Crankshaft and Bearing Removal >> Crankshaft Removal

Crankshaft Removal

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Crankshaft Main Bearing Cap Side Bolts
    GM902789Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft bearing cap side bolts.
  2. Remove the crankshaft bearing cap outer bolts.
  3. Remove the crankshaft bearing cap inner bolts.
    4. Fig 2: View Of Crankshaft Main Bearing Caps
    GM1905889Courtesy of GENERAL MOTORS CORP.
  4. Remove the crankshaft bearing caps using the J 6125-1B  (1) and J 41818  (2). See Special Tools .
    5. Fig 3: View Of Crankshaft
    GM1866875Courtesy of GENERAL MOTORS CORP.
  5. Using two hands, lift the crankshaft straight up from the engine block.
  6. Place the crankshaft in a secure place.
    7. Fig 4: Locating Crankshaft Sprocket Drive Pin
    GM1864436Courtesy of GENERAL MOTORS CORP.
  7. Remove the crankshaft key from the nose of the crankshaft, if damaged.
scientia non olet · About LEMON Manuals