LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1719 (Engine Mechanical - 3.6L (4 Of 6)) >> Repair Instructions - Off Vehicle (2 Of 4) >> Crankshaft and Bearing Removal >> Crankshaft End Play Measurement

Crankshaft End Play Measurement

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a dial indicator at the crankshaft nose.
  2. Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
  3. The crankshaft end play should not exceed specifications. Refer to Engine Mechanical Specifications (LY7) or Engine Mechanical Specifications (LCS) .
  4. If the specifications are exceeded inspect the thrust bearing thrust OD and the crankshaft thrust wall for wear and/or excessive runout. Refer to Engine Mechanical Specifications (LY7) or Engine Mechanical Specifications (LCS) .
  5. Replace the thrust bearing or crankshaft as necessary.
scientia non olet · About LEMON Manuals