Removal Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the Powertrain. Refer to Engine Replacement (LCS) or Engine Replacement (LY7) .
- Remove the right bank secondary timing chain. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right Side .
- If equipped with LCS, remove the right side fuel injector
- Remove the cylinder head with the exhaust manifold. Refer to Cylinder Head Removal - Right Side .
- Remove the Right side Catalytic Converter. refer to Catalytic Converter Replacement - Right Side (LY7) or Catalytic Converter Replacement - Right Side (LCS)
- Remove and discard the cylinder head gasket.
- Clean and inspect the cylinder head and the engine block sealing surfaces. Refer to Cylinder Head Cleaning and Inspection and Engine Block Cleaning and Inspection .
- If necessary, perform the following steps:
- Remove the exhaust manifold from the cylinder head. Refer to Exhaust Manifold Removal - Right Side .
- Remove the camshaft. Refer to Camshaft Removal - Right Side .
- Disassemble the cylinder head. Refer to Cylinder Head Disassemble (LY7) or Cylinder Head Disassemble (LLT or LCS) .