Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- If necessary, perform the following steps:
- Assemble the cylinder head. Refer to Cylinder Head Assemble (LY7) or Cylinder Head Assemble (LLT or LCS) .
- Install the camshaft. Refer to Camshaft Installation - Right Side .
- Install the exhaust manifold to the cylinder head. Refer to Exhaust Manifold Installation - Right Side .
- Install a NEW cylinder head gasket.
- Carefully install the cylinder head with the exhaust manifold to the engine. Refer to Cylinder Head Installation - Right Side .
- Install the right bank secondary timing chain. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right Side .
- Install the engine. Refer to Engine Replacement (LCS) or Engine Replacement (LY7) .