LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1717 (Engine Mechanical - 3.6L (3 Of 6)) >> Repair Instructions - Off Vehicle (1 Of 4) >> Crankshaft Balancer Removal >> Removal

Crankshaft Balancer Removal: Removal

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  1. Install the EN 46106  through the starter mounting hole. See Special Tools .
    2. Fig 2: View Of Crankshaft Balancer Bolt
    GM1864410Courtesy of GENERAL MOTORS CORP.
  2. Remove the crankshaft balancer bolt.
    3. Fig 3: Identifying Crankshaft Balancer Remover
    GM1864555Courtesy of GENERAL MOTORS CORP.
  3. Install the J 38416-2  in the nose of the crankshaft. See Special Tools .
  4. Install the J 41816  in order to remove the crankshaft balancer.
  5. Tighten the center bolt of the J 41816  in order to pull the crankshaft balancer off of the crankshaft.
  6. Remove the J 41816  from the crankshaft balancer.
    7. Fig 4: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  7. Remove the EN 46106  . See Special Tools .
scientia non olet · About LEMON Manuals