Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- If there are any other transmission related DTCs set, diagnose those DTCs first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Engine idling, parking brake applied, range selector in D, command the Shift Transmission with a scan tool to achieve 2nd gear.
- Observe the suspect scan tool TFP Switch parameter while commanding the Shift Transmission with a scan tool to achieve 5th gear. Each TFP Switch parameter should toggle states (from High to Low or Low to High) between 2nd and 5th gear.
- If the specified parameter does not toggle, replace the control solenoid (w/body and TCM) valve assembly.