Conditions for Running the DTC

P0711

• No DTCs P0711, P0716, P0717, P0722, or P0723.
• DTC P0711 has not passed this ignition cycle.
• The TCM temperature sensor is between -49 and +169°C (-56 and +336°F).
• The engine speed is greater than 500 RPM for 5 seconds.
• The ignition voltage is between 8.6 volts and 19.0 volts.
• Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
• TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
• The TFT has changed by less than 2.0°C (3.6°F) in 100 seconds.
• The engine coolant temperature (ECT) is greater than 70°C (158°F).
• The ECT has increased by 55°C (99°F) since startup.

P0712

• The output shaft speed is 200 RPM or greater for 200 seconds or more.
• The TCC slip speed is 120 RPM or greater for 200 seconds or more.
• DTC P0712 is not failed this ignition cycle.
• The engine speed is greater than 500 RPM for 5 seconds.
• The ignition voltage is between 8.6 volts and 19.0 volts.

P0713

• DTC P0713 has not failed this ignition cycle.
• The engine speed is greater than 500 RPM for 5 seconds.
• The ignition voltage is between 8.6 volts and 19.0 volts.