Circuit/System Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the transmission shift lever.
- Test for less than 300-500 ohms of resistance between the signal circuit terminal 6 and ground.
- If greater than the specified range, test the signal circuit for an open/high resistance. If the circuit tests normal, replace the BCM.
- Verify that a test lamp illuminates between the ignition circuit terminal 2 and ground.
- If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BCM.
- If all circuits test normal, test or replace the transmission shift lever.