LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1697 (Engine Controls And Fuel - 3.6L (LCS) - DTC P0192 To DTC P0629) >> DTC P0326, P0327, P0328, P0331, P0332, or P0333 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine at operating temperature, all accessories OFF. Engine speed greater than 2,000 RPM, observe the appropriate scan tool KS signal voltage parameter. The voltage should be greater than 4 V.
  2. Engine idling, move the related harnesses and connectors for the KS circuits while observing the scan tool KS signal voltage parameters. The voltage should remain steady with no abrupt changes.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.