Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not tip the battery over a 45 degree angle or acid could spill causing serious personal injury.
- Install the battery to the vehicle.
- Install the battery hold down nuts (1) and the battery hold down retainer bracket (2) and tighten to 10 N.m (89 lb in).
- Install the positive battery cable terminal nut (1) and tighten to 5 N.m (45 lb in).
- Install the ECM bracket, bolts (2) and nuts (1) and tighten to 10 N.m (89 lb in).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (HP7) .
- Install the generator battery control module cover. Refer to Generator Control Module Cover Replacement .
CAUTION:
Refer to Fastener Caution
.