Battery Negative Cable Replacement (HP7)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Battery Negative Cable

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove battery. Refer to Battery Replacement .
1	Nut CAUTION: Refer to Fastener Caution . Tighten: 23 N.m (17 lb ft)
2	Nut Tighten: 25 N.m (18 lb ft)
3	Negative Battery Cable Procedure Disconnect the battery current sensor. Remove the battery current sensor from the battery cable. Refer to Battery Current Sensor Replacement (HP7) .