Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
- Install the CMP actuator solenoid valve.
- Install the CMP actuator solenoid valve bolt and tighten to 10 N.m (89 lb in).
- Connect the engine wiring harness electrical connector (4) to the bank 2 exhaust CMP actuator solenoid valve (5).
- Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
CAUTION:
Refer to Fastener Caution
.