LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1669 (Automatic Transmission - 2MT70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Instructions >> Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Range Select Lever Cable Bracket
    GM2152747Courtesy of GENERAL MOTORS CORP.
  1. Install the range select lever cable bracket (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bolts (1) securing the range select lever cable bracket, then tighten the bolts to 25 N.m (18 lb ft).
    3. Fig 2: Range Select Cable
    GM2152488Courtesy of GENERAL MOTORS CORP.
  3. Install the range select cable to the range select cable bracket. Ensure the range select cable retaining clip (1) is secured in the bracket.
  4. Connect the range select cable (2) to the range select lever.
  5. Adjust the cable. Refer to Range Selector Lever Cable Adjustment .
  6. Install the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation
scientia non olet · About LEMON Manuals