LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1664 (Engine Controls And Fuel - 3.6L (Ly7) - Introduction) >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EVAP Canister Purge Line
    GM1889291Courtesy of GENERAL MOTORS CORP.
  1. Install the EVAP canister purge line (1) to the vehicle.
  2. Connect the EVAP canister purge line quick connect fitting to the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Connect the EVAP canister purge line quick connect fitting to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LY7) .
scientia non olet · About LEMON Manuals