Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ECT sensor. Tighten the sensor to 22 N.m (16 lb ft).
- Connect the engine wiring harness electrical connector (10) to the ECT sensor (3).
- Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill Without HP5) or Cooling System Draining and Filling (GE 47716 Fill Without HP5)
CAUTION:
Refer to Fastener Caution