Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Install the intermediate shaft in the transmission.
- Move the intermediate shaft back and forth to ensure that the intermediate shaft is properly seated.
- Hand tighten the mounting bolts for the intermediate shaft mounting bracket.
- Tighten the mounting bolts for the intermediate shaft. Tighten the mounting bolts to 22 N.m (16 lb ft).
- Install the NEW intermediate shaft retaining.
- Install the wheel drive shaft assembly. Refer to Front Wheel Drive Shaft Replacement .
- Remove the support and lower the vehicle.
CAUTION:
Refer to Fastener Caution
.