Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Place the ignition switch in the OFF position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Clean all dirt and debris from the brake pressure modulator valve (BPMV) module assembly.

Fig 1: BPMV Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the BPMV bracket bolts (1).
Carefully slide the BPMV module and bracket assembly rearward.
Lower the assembly slightly and support with heavy mechanics wire or equivalent.

Fig 2: BPMV Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 BPMV bolts (1).

Fig 3: BPMV Mosule & Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the BPMV bracket from the BPMV module assembly (1).
Remove the sleeves and insulators from the BPMV module assembly, if necessary.