Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Using a scan tool, perform the EBCM, Module Setup, BMC Prim. Piston Pos. Relearn.
- Verify that DTC C012A, C128B, C128E, C12B2, C12B3, or C12B4 is not set.
- If the DTC is set, replace brake pressure modulator valve (BPMV) assembly. If the DTC resets, replace the EBCM.