Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- If DTC P0480 or P0481 are set, perform those diagnostics first.
- Ignition ON, verify with a scan tool that the ECM is not commanding fan activation.
- Verify cooling fan operation using the scan tool commands listed below:
- Fan relay 1 ON-Both fans run at low speed.
- Fan relays 2 and 3 ON-The right fan runs at high speed, the left fan is OFF.
- Fan relays 1, 2 and 3 ON-Both fans run at high speed.